MSCI-LCD-VDC-AB

General Description :
This is a battery supervision controller intended for supervision substation battery connectivity by activation of signaling circuit at current decreasing to pre-setting value in one pole of substation battery circuit and deactivation of signaling circuit at current increasing to pre-setting value , the MSCI is adjusted for current activation 70+-10mA and current deactivation 130 +/-10mA through the shunt.
MSCI-AB connected to monitored circuit through shunt 80A/60mV while the current carried through the shunt in two directions 0.05 to 80ADC.
Relay & Led are ON when IN<0.07A , Relay & Led are Off when IN>0.13A .
Display =Set when jumper on left side . Display =IN when jumper on right side .

Technical Data
Power supply : 24VDC or 12VDC or 48VDC
Temperature : 0-60 C
Inputs :
Current : 4-20mA ,Rin=25 ohm .
Voltage : 0-10VDC or 0-5VDC or 0-60mV or 0-100VDC or ……etc
Inside Span and Zero adjustable +/-10% .
Outputs:
Current : 4-20mA , Max Load 560 ohm.
Voltage : 0-10VDC Max Load 15mA.
Isolation : Between input and output and power supply : 1500VDC .
Accuracy: +/- 0.2%
Case : Standard case polyamide PA 6.6 inflammability class VO-UL94
Case size : W 25 x H 105 x L 79 mm.